1 Ways Female TS Sealed Series Automotive Connector 6189-0145

Purchase samples from

The form and structure of the automotive connector is ever-changing. It is mainly composed of four basic structural components: contact, housing (depending on the type), insulator, and accessories. These four basic structural components enable the automotive connector to act as a bridge for stable operation.

The contact piece is the core part of the automotive connector to complete the electrical connection function. The contact pair is generally composed of a male contact and a female contact, and the electrical connection is completed by the insertion of the female and male contacts. The male contact is a rigid part that is cylindrical (round pin), square (square pin) or flat (tab). Positive contacts are typically made of brass or phosphor bronze. The female contact, that is, the jack, is a key component of the contact pair. It relies on the elastic structure to elastically deform when it is inserted into the pin, and generates elastic force to form close contact with the male contact member to complete the connection. There are many types of jacks, such as cylindrical (grooving, shrinking), tuning fork type, cantilever beam type (longitudinal slotting), folding type (longitudinal slotting, 9-shaped), box shape (square socket) And a double-curved wire spring jack.

The housing, also known as the shell, is the outer cover of the automotive connector that provides mechanical protection for the built-in insulated mounting plate and pins and provides alignment when the plug and socket are inserted, thereby securing the connector to the device on.

Insulators, also commonly referred to as automotive connector bases or mounting plates, function to position the contacts in the desired position and spacing and to ensure insulation between the contacts and between the contacts and the outer casing. Good insulation resistance, voltage resistance and ease of processing are the basic requirements for the selection of insulating materials into insulators.

Accessories are divided into structural accessories and mounting accessories. Structural accessories such as collars, positioning keys, locating pins, guide pins, coupling rings, cable clamps, seals, gaskets, etc. Install accessories such as screws, nuts, screws, coils, etc. The accessories are mostly standard and general.